What to do when your ice maker quits making ice

ice maker repair Oklahoma City Oklahoma
ice maker needs repair

 

Having ice ready whenever you want or need it is a luxury we all take for granted, that is, up until you reach to get some ice from the freezer and there is none.

Ice makers fail. It’s an unfortunate truth of owning a refrigerator with an ice maker.
There is a silver lining, ice makers are also relatively basic equipment that, essentially, all operate similarly. And also you may be able identify and repair a defective ice maker on your own before dishing out cash for an expensive service call.

Below are tips for just how to repair some common ice maker problems

When ice is not ejecting

It suggests your ice maker is receiving water and also the issue likely isn’t with the water supply if you locate ice inside the ice mold. Instead, it’s probably a mechanical or electrical trouble.

Cause:

When relocating things around in the refrigerator-freezer, it’s not unusual to mistakenly nudge the control arm into the off position, which halts manufacturing of ice.

Repair:

This is a simple solution. Find the steel control arm and also relocate to the down or on position.

Reason:

If the control arm is in the on (down) placement and the mold is loaded with ice, the problem most likely lies with the electric motor, transmission or electric link.

Repair:

Start by making sure all electric connections are effectively seated. Slide the fridge out from the wall surface, turn off the water supply valves as well as disconnect it from power.

Manually remove any remaining ice from the mold by including some warm water as well as allowing it rest for a min. The ice will certainly begin to melt as well as ought to be less complicated to get rid of.
Restore power to the fridge and also lift the control arm to the off placement. Return the control arm back down and wait on around 10 secs for the solenoid to engage and also fill the mold with water.

Wait three to four hours for the ice to see as well as freeze if the ice correctly ejects. If not, it’s likely that you will need to replace the electric motor or gearbox.

When it’s not making ice at all

If your ice maker isn’t making ice whatsoever or is producing cubes that are smaller than normal, it’s generally a sign of an obstruction somewhere along the supply line.

Reason:

A typical reason for an obstruction is frozen water in the line.

Repair:

To repair a frozen line, slide the refrigerator out and unplug it. Locate the shut-off valve, commonly beneath the sink or behind the fridge. Turn the shutoff to the closed or off position. Load a turkey baster with warm water and put the water over the water line. You can thaw the water line with a hair clothes dryer or by letting the refrigerator rest unplugged for upward of two hours.

Bring back power to the fridge and listen for the water to fill up the ice mold.
Consult with a professional for aid getting rid of the obstruction if the clog is not visible.

Reason:

There is also a possibility that the water filter for the ice maker is obstructed.

Dealing with it:

Replace the water as well as the filter. Filters for ice makers are generally located inside the refrigerator (to keep them from freezing).

When cubes are as huge or small

Cause:

If the ice cubes are huge there is no clog as well as they’re still small, chances are, the ice maker just needs a little adjustment.

Repair:

To adjust just how much water the ice mold is full of each cycle, first remove the cover from the ice maker. It’s the white plate on the frontmost part of the ice maker assembly and also it ought to come off easily. Make use of a flat head screwdriver to carefully pry it away from the ice maker if you’re having a problem removing it.

Under the cover, you ought to see a screw as well as spring assembly, along with a plus as well as minus indicator. This controls the amount of water. Screw in (toward the minus icon) to decrease the quantity of water per dosage as well as out (toward the and also) to boost the amount of water per dosage.

If after following these steps you are still having problems and are in need of an ice maker service call in OKC contact Appliance Repair OKC Appliance Service – Oklahoma County at 405-266-2110 or you can visit our website at https://okcappliancerepairandservice.com.

 

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Recent Posts
Categories

Contact Us

Appliance Repair OKC Appliance Service Oklahoma County
8070 N Glade Ave Suite A, Oklahoma City, OK, 73132-4236

Call Us: (405) 266-2110
https://okcappliancerepairandservice.com

Address
FREE CONSULTATION WITH REPAIR
FREE CONSULTATION

Get Free Estimation With Repair

Contact Form